![]() |
![]() |
|
|
||||||
|
The Showroom
This is the place to show off your BMW to other members of the community. Post pictures and videos of your car and the modifications you have done to it. If you need a picture of something on a coupe, sedan, convertible or touring you will probably find it here! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
Andrew Cross 323Ci Build Thread
Hello everyone, I would like to share my progress with my car with all of you. I got the car in June 2011 and I've enjoyed driving it ever since. All I've really done to it in the past is installed angel eyes and slapped on a ZHP knob.
Anyway, this afternoon I installed M3 seats Before: ![]() ![]() Passenger seat out, my carpets were so nasty. ![]() Holes in the front bumper, courtesy of front plate laws. I want to get M Tech II bumpers anyway, so I'm not too bummed. ![]() Passenger seat in: ![]() Both seats in, I'll get better pictures tomorrow ![]() I found french fries and a cigarette in the nether regions of my driver's seat when taking it out. I've had the car for a year and a half, and I've never eaten in it, I don't smoke either... I've got a lot planned for this car, just wanted to share with all of you.
__________________
![]() Last edited by AndrewCross; 12-27-2012 at 07:24 PM. |
|
|
|
|
|
#2 |
|
Registered User
Join Date: Jun 2008
Location: Raleigh/Greenville
Posts: 1,459
My Ride: rustles jimmies
|
Looks like you found 62 cents!!!
__________________
![]() |
|
|
|
|
|
#3 |
|
Registered User
|
Well it looks clean and at least you take nice pictures. Thumbs up so far!
__________________
|
|
|
|
|
|
#4 |
|
Registered User
|
My car is practically paying for itself!
![]() Thank you sir!
__________________
![]() Last edited by AndrewCross; 12-27-2012 at 08:16 PM. |
|
|
|
|
|
#5 |
|
Registered User
|
Looks great! M3 seats are a big improvement! Wrap that interior trim, get an M3 steering wheel, some gauge rings, and the interior will be
__________________
|
|
|
|
|
|
#6 |
|
Registered User
|
nice. keep us updated.
__________________
cheers, Silviu...
THE TURBO |
|
|
|
|
|
#7 |
|
MR.CLEAN ;)
|
Can he get an m3 steering wheel since his is stage 1 air bag?
|
|
|
|
|
|
#8 |
|
Registered User
Join Date: Sep 2007
Location: Morgantown WV - Stockholm
Posts: 5,771
My Ride: 325xi - Mustang GT
|
This! Very clean car.
__________________
![]() |
|
|
|
|
|
#9 |
|
Registered User
|
Here are some pictures from today:
![]() ![]() ![]() I'm trying to get a newer sport wheel or a ZHP wheel, but I need to figure some stuff out with the airbags. Hopefully it's just plug and play with the circular airbag. I also want to get new trim. Mine is cracked, so if I were to CF wrap it, you'd probably still see a bit of texture where the cracks are. I also need/want new A, B, and C pillar covers, so I'm thinking about converting to black headliner
__________________
![]() |
|
|
|
|
|
#10 |
|
Registered User
|
I've been out of town, so I haven't had time to do much to the car, but I have a minor update.
My third brake light trim was sagging really badly, so I kind of ghetto-rigged it for a temporary solution. Still deciding whether or not to convert to black headliner. Please excuse the poor iphone pictures. ![]() ![]() This week I'm fixing my sunroof and hopefully dyeing my rear deck black.
__________________
![]() |
|
|
|
|
|
#11 |
|
Registered User
|
Looks good. Look forward to seeing some mods.
![]() Sent from my SGH-T959V using Bimmer App
__________________
|
|
|
|
|
|
#12 |
|
Registered User
|
Not much progress is going on, I've been getting lazy because of the cold. Anyway, this spring I'm replacing subframe bushings and diff bushings. After that, the modding will take off. I'll post pictures of my subframe and diff bushing adventures. I also still need to fix my sunroof, install the sunshade, and dye my rear deck, planning on getting that done this week.
__________________
![]() |
|
|
|
|
|
#13 |
|
Registered User
|
Hi everyone, sorry nothing really has happened progress-wise for a little while. I did find out, though, that I can't swap to an M3/ZHP steering wheel. Because my car was built in 8/99, it would require new airbags everywhere, a new wiring harness, new airbag module, and some other stuff. So it looks like I'm stuck with the triangle for a while.
I finally have an update though! Some friends and I started doing subframe bushings this weekend, here's what we've accomplished so far: ![]() Pretty big DIY, but it's been pretty fun so far. Thankfully I have no frame damage and I found out that the previous owner welded a reinforcement plate to the left rear subframe mount. Now it's time to get these bushings out. I'll report progress as it comes along. Oh, we also turned it on and revved it a bit with open headers. It sounds too good Also, big things are coming this summer, finally. Really looking forward to it.
__________________
![]() Last edited by AndrewCross; 03-19-2013 at 10:02 AM. |
|
|
|
|
|
#14 |
|
Registered User
|
subscribed, like the way this is going.
|
|
|
|
|
|
#15 |
|
Registered User
|
Very nice car!
I will monitor the progress! Good luck |
|
|
|
|
|
#16 |
|
Registered User
|
__________________
'98 328Is ARKTISSILBER l Keskin KT1 17x8.5 et20 & 17x10 et25 l BC BR l DJ AUTO - 93Octane Photography - BC Racing l ECS Tunning l TheBMWPartsStore.com |
|
|
|
|
|
#17 |
|
Registered User
|
Hi twin
Don't think I've ever seen MPars on an E46, looks pretty good!!
__________________
![]() |
|
|
|
|
|
#18 |
|
Registered User
|
__________________
![]() Last edited by AndrewCross; 03-22-2013 at 10:44 AM. |
|
|
|
|
|
#19 |
|
MR.CLEAN ;)
|
Oh that little thing? It just holds the entire rear end of your car together so it doesn't fall out while driving
JK not sure Last edited by THECLEANERBEAMER; 03-22-2013 at 02:44 PM. |
|
|
|
|
|
#20 |
|
Registered User
|
great thread....looking forward to seeing more
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|