![]() |
![]() |
|
|
||||||
|
Exterior
Exterior BMW parts, OEM or aftermarket. Body kits, spoilers, body panels, trunks, hoods, fenders, lips, bumpers, mirrors, moldings, trim, etc... |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
Off a Coupe. It's bare, has one major scratch on right side and some minor scuffs. Also has tape residue left over from an aftermarket lip that was on the trunk. $60.
Also selling E46 BMW 330Ci Jim Conforti Intake Shield w/ CF Pipe $100 Heat shield, carbon fiber intake tube, and connector to front air scoop. Needs new 3.5inch filter (measured). The paint on the engine side of the shield is falling off (not visible). One hole on the front scoop connector that I've patched with electrical tape. Other than that, it does it's job. Reason for selling? I decided to keep the stock intake on after they wouldn't pass my emissions visual inspection. Did some research here's the original foam filter: http://www.turnermotorsport.com/p-34...take-kits.aspx I travel near the San Gabriel Valley and Los Angeles area from time to time. Could possibly meet up. Last edited by hegamiz; 08-24-2012 at 08:33 PM. Reason: Addition |
|
|
|
|
|
#2 |
|
Registered User
|
I'd buy this right now if you were closer...dammit.
|
|
|
|
|
|
#3 |
|
Registered User
|
BUMP! Throw me some offers. Also, trying to keep it local.
Last edited by hegamiz; 04-16-2013 at 11:53 AM. Reason: Details |
|
|
|
|
|
#4 |
|
Registered User
|
PM sent last night
__________________
orange260z
2005 BMW 330Ci M Sport Cabriolet 1970 Porsche 911 T/RS-spec |
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|