![]() |
![]() |
|
|
||||||
|
Lighting Forum
Angel Eyes, DDEs, lighted rings, Clear Turn Signals, LEDs, Xenon, HID, or Bi-Xenon. If it lights up and you want to discuss it, post here! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
e46 LED Tail light problem
I need someone's help. I have a 2004 325ci. I ordered some LED tail light to replace the ones that I had and the connector from the car is too small for the one the new LED tail lights came with.
Any suggestions what I can do? |
|
|
|
|
|
#2 |
|
Registered User
|
Did you get OEM or aftermarket? Where did you order them from?
__________________
![]() -2003 M3 Vert -1967 Mini Cooper |
|
|
|
|
|
#3 |
|
Registered User
|
I am not sure. I got them from ebay.
|
|
|
|
|
|
#4 |
|
Registered User
|
Did you have the part number, and verify that the ebay seller was providing the correct part number? Part numbers for BMWs can be obtained at www.realoem.com. You enter the last 7 digit of your VIN and browse the cataloge to find your part and corresponding part number.
Ebay is not my first choice for auto parts, but I would certainly verify the correct part number with the seller. Now that you are stuck with the part, if the wires match up in number and color, you might try splicing your old connector into your new light assembly. Good luck. |
|
|
|
|
|
#5 |
|
Registered User
|
Oke wich connector do you have, see pic.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|