Whiteline adjustable rear camber arm set - anyone have info?

CokMinusTheS54 · 03-11-2012, 05:56 PM

I came across this set while looking for rear trailing arms on ECS. It would be about $100 for two meyle arms so I thought why not spend the extra $20 for adjustability. ECS doesn't give a picture of them though (I like to see what I'm buying) so I checked out their website. All the Whiteline website shows is a picture of bushings and says that the "Camber correction - control arm upper outer bushing" set (same part number ECS listed) is eccentrically adjustable. Surely this kit isn't just bushings that can adjust camber eccentrically, right? Shipping dimensions are 19x17 cm so that leads me to think there are arms in the box, but you never know now days.

So I wanted to see if anybody has had any experience with these and could tell me more.
Here are the links
http://www.ecstuning.com/BMW-E46-325...ear/ES2528707/
http://www.whiteline.com.au/product_..._number=W62384

Thanks

Snik · 03-11-2012, 05:59 PM

I never understood why those simple parts cost so much in the 1st place.
glad to see these cheaper ones hitting the market.

There was a thread on some cheapo ones a few weeks back, but i dont think this brand came up.
Dude bought the el cheapo bars off ebay and so far so good.
they were like under $200/pr.

do a search, cant remember the names of them tho.

ThatGuy_JZ · 10-10-2012, 09:54 AM

Bump, any more info on these?

Do these install in #2 or #14 or #6

WDE46 · 10-10-2012, 09:56 AM

Quote:

Originally Posted by ThatGuy_JZ

Bump, any more info on these?

Do these install in #2 or #14 or #6

No idea what part you are talking about. The OP's links are dead.

ThatGuy_JZ · 10-10-2012, 01:09 PM

Here
http://www.whiteline.com.au/product_...sans_vehicle=1

and a better pic of what I assume is the actual product
http://www.ecstuning.com/Search/W62384/ES2528707/

ThatGuy_JZ · 10-12-2012, 07:25 PM

Well I found this regarding the kmac bushings... I suppose its similar?

http://www.bavauto.com/Assets/inst_pages/ins046.pdf

TrippinBimmer · 10-12-2012, 08:24 PM

install on part number 3 on the realoem..

ThatGuy_JZ · 10-15-2012, 09:36 AM

Thanks!

Found this too, but no info yet on finding a press/tool to pull the bushing.

http://blog.bavauto.com/11278/bmw-re...e36-e46-z4-x3/

10-10-2012, 09:54 AM	#3
ThatGuy_JZ Registered User Join Date: Jul 2008 Location: CLT, NC Posts: 976 My Ride: '02 Steel Blue 325Ci View My Garage	Bump, any more info on these? Do these install in #2 or #14 or #6 __________________ - 2002 Steel Blue 325Ci -

10-10-2012, 01:09 PM	#5
ThatGuy_JZ Registered User Join Date: Jul 2008 Location: CLT, NC Posts: 976 My Ride: '02 Steel Blue 325Ci View My Garage	Here http://www.whiteline.com.au/product_...sans_vehicle=1 and a better pic of what I assume is the actual product http://www.ecstuning.com/Search/W62384/ES2528707/ __________________ - 2002 Steel Blue 325Ci -

10-12-2012, 08:24 PM	#7
TrippinBimmer Registered User Join Date: Jan 2008 Location: Ridgeland, MS Posts: 5,338 My Ride: ZHP Custom Stage 3.5 View My Garage	install on part number 3 on the realoem.. __________________ ..::\|TrippinBimmer's Boost Build with Cool Parts\|::.. 4whp/3tq SAE Corrected \| Active Autowerke \| BimmerBrakes \| VMR Wheels \| ..::\| TrippinBimmer's New Project : 1988 e30 325e \|::..

10-15-2012, 09:36 AM	#8
ThatGuy_JZ Registered User Join Date: Jul 2008 Location: CLT, NC Posts: 976 My Ride: '02 Steel Blue 325Ci View My Garage	Thanks! Found this too, but no info yet on finding a press/tool to pull the bushing. http://blog.bavauto.com/11278/bmw-re...e36-e46-z4-x3/ __________________ - 2002 Steel Blue 325Ci -

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-11-2012, 05:56 PM	#1
CokMinusTheS54 Registered User Join Date: Nov 2009 Location: Jayhawk Central Posts: 517 My Ride: '01 TiAg 325Ci 5mt View My Garage	Whiteline adjustable rear camber arm set - anyone have info? I came across this set while looking for rear trailing arms on ECS. It would be about $100 for two meyle arms so I thought why not spend the extra $20 for adjustability. ECS doesn't give a picture of them though (I like to see what I'm buying) so I checked out their website. All the Whiteline website shows is a picture of bushings and says that the "Camber correction - control arm upper outer bushing" set (same part number ECS listed) is eccentrically adjustable. Surely this kit isn't just bushings that can adjust camber eccentrically, right? Shipping dimensions are 19x17 cm so that leads me to think there are arms in the box, but you never know now days. So I wanted to see if anybody has had any experience with these and could tell me more. Here are the links http://www.ecstuning.com/BMW-E46-325...ear/ES2528707/ http://www.whiteline.com.au/product_..._number=W62384 Thanks __________________

10-12-2012, 07:25 PM	#6
ThatGuy_JZ Registered User Join Date: Jul 2008 Location: CLT, NC Posts: 976 My Ride: '02 Steel Blue 325Ci View My Garage	Well I found this regarding the kmac bushings... I suppose its similar? http://www.bavauto.com/Assets/inst_pages/ins046.pdf __________________ - 2002 Steel Blue 325Ci - Last edited by ThatGuy_JZ; 10-12-2012 at 07:25 PM.