|
|
|
|
||||||
|
Lighting & Mobile Electronics (I.C.E.)
Xenon lighting, HID kits, fog lights, BMW head units, navigation, speakers, subwoofers, In Car Electronics (I.C.E.), carputers, DDEs, angle eyes, halos, LED tail lights, interior lighting, etc. |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-01-2011, 03:02 PM
|
#1 |
|
Modded ///Member
|
FS: Facelift Sedan Bi-xenon Headlights
These headlights are Complete ZKW headlights with ZKW E90 bowls retrofitted to them. They are in good shape. Everything functions properly. No broken or repaired mounting tabs. The bezels around the projector lenses look nice but they are not perfect. The driver side has a blemish towards the top and the passenger side has a small scratch. Hard to see especially when installed. If you have an questions feel free to send me a pm. $700.00 shipped in the continental U.S.
                 |
|
|
|
10-19-2011, 12:04 AM
|
#2 |
|
Modded ///Member
|
__________________
 |
|
|
|
|
11-10-2011, 12:39 AM
|
#3 |
|
Modded ///Member
|
I could also make these for use in a coupe if needed.
__________________
|
|
|
|
|
11-18-2011, 03:03 PM
|
#4 |
|
Registered User
|
ARe those plastic or glass lenses...are this pnp even with the e90 set up for oem halogen
|
|
|
|
11-18-2011, 03:37 PM
|
#5 | |
|
Modded ///Member
|
Quote:
__________________
|
|
|
|
|
|
12-01-2011, 04:41 PM
|
#6 |
|
Modded ///Member
|
$625.00 shipped in the U.S.
__________________
|
|
|
|
|
12-17-2011, 06:44 PM
|
#7 |
|
Modded ///Member
|
Weekend
__________________
|
|
|
|
|
01-14-2012, 10:26 AM
|
#8 |
|
Modded ///Member
|
__________________
|
|
|
|
|
02-03-2013, 11:53 AM
|
#9 |
|
Modded ///Member
|
If any one is interested in these lights let me know. Thanks!
__________________
|
|
|
|
|
02-03-2013, 12:09 PM
|
#10 |
|
Registered User
|
Bump for awesome seller.
Tried leaving you feedback the other day but couldn't for some reason.
__________________
|
|
|
|
|
02-03-2013, 12:22 PM
|
#11 |
|
Modded ///Member
|
Thanks! I have found the itrader feedback to be a little picky. I have to write two words in the message box or it won't accept the feedback.
__________________
|
|
|
|
|
02-05-2013, 10:50 AM
|
#12 |
|
Registered User
|
I am interested. I was looking to do the retrofit myself off of a used AL housing, but the convenience of plug and play is alluring. What's your reason for selling? And this blemish / scratch you speak of, is it on the plastic housing covers or the projector lens itself? Did you test everything after your retrofit, namely the auto-leveling, high beam switch, correct cut-off, etc?
Thanks, Chris |
|
|
|
|
02-06-2013, 12:07 AM
|
#13 |
|
Modded ///Member
|
Hi Chris,
Well lets see. I am not using them and I want to buy something else. The blemish and scratch was on the projector shroud. The "chrome" part that surrounds the projector lens. But that is not an issue as those shrouds along with those lights are gone. I have another set though. Everything was working before and after the retrofit.
__________________
|
|
|
|
|
02-11-2013, 09:18 AM
|
#14 |
|
Modded ///Member
|
__________________
|
|
|
|
|
02-13-2013, 04:36 PM
|
#15 |
|
Modded ///Member
|
A set is available.
__________________
|
|
|
|
|
02-13-2013, 09:10 PM
|
#16 |
|
OEM ///Member
|
What do I need to get so I dont get the bulb out message on dash?
__________________
 |
|
|
|
|
02-13-2013, 09:17 PM
|
#17 |
|
Modded ///Member
|
You either need to get your car flashed(re-programmed). Or install error eliminators/cancelers inline just before the ballast. Which I also have.
__________________
|
|
|
|
|
02-18-2013, 01:32 PM
|
#18 |
|
Modded ///Member
|
__________________
|
|
|
|
|
03-02-2013, 04:55 PM
|
#19 |
|
Modded ///Member
|
Still a set available!
__________________
|
|
|
|
|
03-09-2013, 10:22 PM
|
#20 |
|
Modded ///Member
|
__________________
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
