![]() |
![]() |
|
|
||||||
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
|
Oem rear trunk spoiler removal
I've searched but can't seem to find a DIY for removing oem tear trunk spoiler. I'm not sure if its held by screws or adhesive tape or both. Anyone have an idea? I want to replace it with a lip.
|
|
|
|
|
|
#2 |
|
Registered User
|
Does anyone know if its held by adhesive or screws?
|
|
|
|
|
|
#3 |
|
Registered User
|
I just looked at RealOEM and they listed an adhesive kit and two clips that go with the spoiler. If you're not going to call a dealership, pull the interior cover off the lid and see if there are fasteners visible.
|
|
|
|
|
|
#4 |
|
Registered User
|
Damn, that's one place I didn't look at was realoem. So that means that their are holes in my trunk for that. I was just going to remove it if it was only adhesive
|
|
|
|
|
|
#5 |
|
Registered User
|
Bump
Last edited by E462005; 12-11-2012 at 02:10 PM. |
|
|
|
|
|
#6 |
|
Registered User
|
There are holes under it, I wouldn't take it off if I were you. I put a oem spoiler on my old 330ci to cover them as the PO had taken it off...
Last edited by boostedisbetter; 12-11-2012 at 02:36 PM. |
|
|
|
|
|
#7 |
|
Registered User
|
Yea I jus found out-__- so I have no option but to leave it on there. I hate the oem spoiler. I can't even put a lip.
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|