|
|
|
|
||||||
|
Forced Induction Forum Sponsored by Active Autowerke
Discuss supercharging, turbocharging and even nitrous and water injection here. Sponsored by Active Autowerke |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
11-06-2012, 08:03 PM
|
#1 |
|
Registered User
|
What Kind of Turbo is this?
I have this turbo and I am trying to figure out exactly what it is.
   In the circular tube of the turbo there is what looks like a "7." What else is a way to determine model or size? Thanks. Last edited by BeamNblack; 11-06-2012 at 08:05 PM. |
|
|
|
11-06-2012, 08:18 PM
|
#2 |
|
Registered User
|
very easily. take off the compressor and turbine housing and measure the wheels.
you can also measure the dimension for the turbine inlet flange. 57mmx44mm is T3 and 75mmx50mm is T4
__________________
VQ38DETT on twin 6262 with ProEFI128
|
|
|
|
|
11-06-2012, 09:59 PM
|
#3 |
|
Registered User
|
Any other tips? The inlet isn't matching up.
|
|
|
|
|
11-06-2012, 10:38 PM
|
#4 | |
|
Registered User
|
Quote:
In regards to the turbine inlet, are you sure you measured the correct part? It's the opening in your last picture.. the opening that has the orange/copper silicon gasket maker partially in one corner. By looking at the picture the housing appears to be a T31 2.5" 4-bolt T3 turbine housing. To find out more you really need to remove the housings and measure the wheels  Last edited by dan avoN7; 11-06-2012 at 10:39 PM. |
|
|
|
|
|
11-07-2012, 01:37 AM
|
#5 |
|
Registered User
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
