![]() |
![]() |
|
|
||||||
|
General E46 Forum
This is the place to get answers, opinions and everything you need related to your E46 (sedan, coupe, convertible and wagon) BMW! |
![]() |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
|
#1 |
|
Registered User
Join Date: Aug 2012
Location: Centurion, south africa
Posts: 8
My Ride: E46 318i, E53 4.6IS
|
E46 PCV / crankcase vent valve / pressure regulator
Hi guys,
So changed this on my 2005 e46 330i not more than a week ago, along with all the pipes. So after doing the breaks today and taking it around the block, so when i switched it of, i heard a gush of wind from the engine bay after 5-20sec, right there i got abit worried, so switched her on again and took of the oil cap while idling, and there was some sucking, and not the good kind .......... So has the unit gone again for some odd reason, or was this a faulty unit?? Any ideas why the unit would die again in such a very short period of time?? Any suggestions |
|
|
|
|
|
#2 |
|
Registered User
Join Date: Aug 2012
Location: Centurion, south africa
Posts: 8
My Ride: E46 318i, E53 4.6IS
|
Anybody any suggestions, I am very desperate, have posted this on a local fanatics site as well, but with no luck so far..
|
|
|
|
|
|
#3 |
|
Weagle Weagle
|
Recheck all the hoses you installed. Maybe you screwed one up.
|
|
|
|
|
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Centurion, south africa
Posts: 8
My Ride: E46 318i, E53 4.6IS
|
|
|
|
|
![]() |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|