How do I remove a radio?+ question

Ballinboy1020 · 12-13-2012, 02:58 PM

I have searched every where! Cant find a DYI on radio removal please help guys.

Another question... Will radio part # 65126909882 work in my car? I want to have the same radio I had before. My pixels are all messed up. I have a 2001 3.25ci production year 10/00

choxor · 12-13-2012, 03:01 PM

Any dynavin DIY will show you how to remove the radio.

Ballinboy1020 · 12-13-2012, 04:17 PM

Thanks. how about that question about the radio fitting my car

markusmarkus · 12-13-2012, 06:06 PM

Remove the dash trim (mine is "silver") using a very dull edge. There are no screws as this piece hast three pins that slide into the dash. Then repeat the process on the trim that sits over the radio. You'll. see that the first piece helps to hold the second piece in place.
With the second piece of trim out you'll see there are two screws holding the radio in the dash. Remove the screws and the slide the radio out. It's a tight fit so be careful.

12-13-2012, 02:58 PM	#1
Ballinboy1020 Registered User Join Date: Aug 2009 Location: florida Posts: 131 My Ride: 325ci View My Garage	How do I remove a radio?+ question I have searched every where! Cant find a DYI on radio removal please help guys. Another question... Will radio part # 65126909882 work in my car? I want to have the same radio I had before. My pixels are all messed up. I have a 2001 3.25ci production year 10/00

12-13-2012, 03:01 PM	#2
choxor Fully Deeked Out Join Date: Nov 2010 Location: Atlanta, GA Posts: 2,938 My Ride: An Automobile View My Garage	Any dynavin DIY will show you how to remove the radio. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12-13-2012, 04:17 PM	#3
Ballinboy1020 Registered User Join Date: Aug 2009 Location: florida Posts: 131 My Ride: 325ci View My Garage	Thanks. how about that question about the radio fitting my car

12-13-2012, 06:06 PM	#4
markusmarkus Registered User Join Date: Jul 2008 Location: USA Posts: 352 My Ride: 2001 330Ci View My Garage	Remove the dash trim (mine is "silver") using a very dull edge. There are no screws as this piece hast three pins that slide into the dash. Then repeat the process on the trim that sits over the radio. You'll. see that the first piece helps to hold the second piece in place. With the second piece of trim out you'll see there are two screws holding the radio in the dash. Remove the screws and the slide the radio out. It's a tight fit so be careful.