DIY bullet trap

tailo · 03-07-2013, 08:46 PM

I made this for a new class III dealer my town has to demo cans in.

Stand made from scrap exhaust tubing and some angle iron I had left over from a trailer job I did a few weeks back. The pipe in the middle is about 2 foot long and 3 inch in diameter, it will be filled with a bag of cement, a couple feet of pea gravel and topped off with sand.

alot better than my last trap

GasKing · 03-08-2013, 09:32 AM

What caliber would that stop?

tailo · 03-08-2013, 10:07 AM

Pretty much any common caliber. The most that will be shot in to it is .308 but its mostly going to be used for .22, 9mm, and .45.

SLVR JDM · 03-08-2013, 10:22 AM

What would you commonly use this for? Testing function after some work on the firearm?

tailo · 03-08-2013, 11:12 AM

There going to use it to sell silencers.

SLVR JDM · 03-08-2013, 11:33 AM

So basically for product demo?

tailo · 03-08-2013, 03:17 PM

Yup, best way to sell a silencer is to let somebody hear one.

03-07-2013, 08:46 PM	#1
tailo Registered User Join Date: Mar 2011 Location: virginia Posts: 979 My Ride: 02 330I View My Garage	DIY bullet trap I made this for a new class III dealer my town has to demo cans in. Stand made from scrap exhaust tubing and some angle iron I had left over from a trailer job I did a few weeks back. The pipe in the middle is about 2 foot long and 3 inch in diameter, it will be filled with a bag of cement, a couple feet of pea gravel and topped off with sand. alot better than my last trap Last edited by tailo; 03-07-2013 at 09:12 PM.

03-08-2013, 10:22 AM	#4
SLVR JDM Registered User Join Date: Nov 2005 Location: Work Posts: 1,495 My Ride: reclining rear seats View My Garage	What would you commonly use this for? Testing function after some work on the firearm? __________________ Removed

03-08-2013, 11:33 AM	#6
SLVR JDM Registered User Join Date: Nov 2005 Location: Work Posts: 1,495 My Ride: reclining rear seats View My Garage	So basically for product demo? __________________ Removed

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

03-08-2013, 09:32 AM	#2
GasKing Registered User Join Date: Oct 2012 Location: East Coast Posts: 387 My Ride: Maxima Limited ed View My Garage	What caliber would that stop?

03-08-2013, 10:07 AM	#3
tailo Registered User Join Date: Mar 2011 Location: virginia Posts: 979 My Ride: 02 330I View My Garage	Pretty much any common caliber. The most that will be shot in to it is .308 but its mostly going to be used for .22, 9mm, and .45.

03-08-2013, 11:12 AM	#5
tailo Registered User Join Date: Mar 2011 Location: virginia Posts: 979 My Ride: 02 330I View My Garage	There going to use it to sell silencers.

03-08-2013, 03:17 PM	#7
tailo Registered User Join Date: Mar 2011 Location: virginia Posts: 979 My Ride: 02 330I View My Garage	Yup, best way to sell a silencer is to let somebody hear one.