|
|
|
|
||||||
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
03-19-2013, 10:41 AM
|
#1 |
|
Registered User
Join Date: Oct 2007
Location: 1600 Penn. Ave
Posts: 1,777
My Ride: 325ci / 350Z / LS400
|
Clutch replacement recommendations & price
For a 325ci?
Sent from my DROID RAZR using Bimmer App
__________________
 |
|
|
|
03-22-2013, 07:51 PM
|
#2 |
|
Registered User
Join Date: Dec 2006
Location: Ithaca, NY --> Baltimore, MD
Posts: 6,352
My Ride: 99 M3
 |
Going with a single-mass flywheel will cause transmission chatter whether you use the Redline mix/run a sprung hub or not. If you want OEM quietness/smoothness, go with a new OEM dual-mass flywheel and clutch kit. Don't forget to do the pilot bearing, throw out bearing, rear main seal, input shaft seal, and pivot pin. It's also a good opportunity to do the shift detent bushings/springs, which fixes the 5th gear lean.
__________________
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
