|
|
|
|
||||||
|
Driveline, Engine & DME Tuning
Talk about driveline improvements, NA tuning and DME tuning your E46 BMW here. This includes diffs, intakes, exhausts, chips, software and OBD tuning. |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
12-20-2010, 04:12 AM
|
#1 |
|
Registered User
|
Non-M 6 speed clutch alignment tool
Does anyone have an extra one laying around? I'll buy it.
Keep in mind that this only applies to facelift coupes and ZHP sedans that came with the 6 speed. Be aware that these are apparently hard to find. So I'd keep yours if you only have one. |
|
|
|
04-23-2011, 08:44 PM
|
#2 |
|
Registered User
|
BMW part number for the tool is 83-30-0-494-280.
 It's about $33.  |
|
|
|
|
04-24-2011, 10:53 AM
|
#3 |
|
Registered User
|
Sweet, thanks!
|
|
|
|
|
04-24-2011, 12:05 PM
|
#4 |
|
Registered User
|
OEM tool for $33? Sounds cool
Did you end up getting the Lisle tool? I found that it works to move the disc around but it's too loose to really use for alignment. I had to judge alignment by how the outside of the disc lined up with the pressure plate.
__________________
 Technique Tuning Stage 1 Turbo w/ Greddy Profec B Spec II | 3.07 Quaife ATI Super Damper | Vaio Oil Pump | VAC Pan Baffle | SRE Organic Clutch Turner Reinforcements | SPC Camber Arms | Powerflex FCABs & SFBs Turbo Driveability Video Horsepower vs. Torque - updated |
|
|
|
|
04-24-2011, 06:24 PM
|
#5 |
|
Registered User
|
Got the lisle tool but will definitely get the OEM tool.
|
|
|
|
|
01-11-2013, 04:58 PM
|
#6 |
|
Registered User
Join Date: Dec 2008
Location: Princeton, NJ
Posts: 2,737
My Ride: 04' 330ci & 99' 540i
|
Bumping an old thread..
Will the oem BMW tool work with an aftermarket clutch?
__________________
|
|
|
|
|
01-11-2013, 07:53 PM
|
#7 |
|
Registered User
Join Date: Dec 2008
Location: Princeton, NJ
Posts: 2,737
My Ride: 04' 330ci & 99' 540i
|
Bump, really need to find a tool...
__________________
|
|
|
|
|
01-12-2013, 05:02 PM
|
#8 |
|
Registered User
|
I just modified a 5 speed tool my buddy had laying around
__________________
Royal Elite Club of 6 Speed Tourings - founder
|
|
|
|
|
01-13-2013, 06:53 PM
|
#9 |
|
Registered User
Join Date: Dec 2008
Location: Princeton, NJ
Posts: 2,737
My Ride: 04' 330ci & 99' 540i
|
So the splines aren't needed?
__________________
|
|
|
|
|
01-13-2013, 07:33 PM
|
#10 |
|
Registered User
Join Date: Jan 2008
Location: Ridgeland, MS
Posts: 5,349
My Ride: ZHP Custom Stage 3.5
  |
^ his way is kinda ghetto but it will do..
__________________
..::|TrippinBimmer's Boost Build with Cool Parts|::.. 4**whp/3**tq SAE Corrected |
|
|
|
|
01-14-2013, 12:45 PM
|
#11 |
|
Registered User
|
worked fine for me.. it kept the clutch disk right where it needed to be
__________________
Royal Elite Club of 6 Speed Tourings - founder
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
