Sourcing stock coupe front bumper in Sydney.

sychen · 01-16-2013, 03:22 PM

Hi fellas.

Need to replace a coupe front bumper... Not sure where to find locally this as I normally order parts from OS.

Want to keep the oem look and not go for a m3 or csl style "upgrade".

Thanks

Sent from my Galaxy Nexus using Bimmer App

Pawley · 01-16-2013, 04:52 PM

Hi Sychen,

I am in the midst of replacing my OEM pre-facelift front bumper with a M-tech II.

The OEM bar has some paint damage (carbon schwartz 303 in colour) and will need to be resprayed, but is otherwise structurally sound.

I am in Adelaide, but could arrange freight.

M3 CS · 01-17-2013, 07:07 PM

What's wrong with the current one? If it's not too bad and just need a spray, would be a cheaper alternative than sourcing another one and spraying.

Otherwise, have used the following without issues:

Sydney Wide European Autos - www.swea.com.au

Parramatta Prestige - www.parramattaprestige.com.au

Rob32R · 01-18-2013, 03:31 AM

Try Parramatta Presige or ASV Euro spares who both are european car wreckers that usually specialise in BMW's who would most likely have the part you are after.

http://www.eurocarparts.com.au/

http://www.parramattaprestige.com.au/

Goondaddy · 01-18-2013, 05:53 AM

Should have posted this last week. Just threw out my old one!

Also recommend SWEA.

01-16-2013, 03:22 PM	#1
sychen Registered User Join Date: Dec 2012 Location: Sydney Posts: 2 My Ride: E46 View My Garage	Sourcing stock coupe front bumper in Sydney. Hi fellas. Need to replace a coupe front bumper... Not sure where to find locally this as I normally order parts from OS. Want to keep the oem look and not go for a m3 or csl style "upgrade". Thanks Sent from my Galaxy Nexus using Bimmer App

01-17-2013, 07:07 PM	#3
M3 CS Registered User Join Date: Dec 2007 Location: Australia Posts: 1,597 My Ride: Vienta Grande View My Garage	What's wrong with the current one? If it's not too bad and just need a spray, would be a cheaper alternative than sourcing another one and spraying. Otherwise, have used the following without issues: Sydney Wide European Autos - www.swea.com.au Parramatta Prestige - www.parramattaprestige.com.au __________________ Need your Prestige car detailed? Visit: www.t-wd.net Last edited by M3 CS; 01-17-2013 at 07:08 PM.

01-18-2013, 03:31 AM	#4
Rob32R Registered User Join Date: Sep 2012 Location: Sydney, NSW, Australia Posts: 89 My Ride: BMW 530i E60,VW R32 View My Garage	Try Parramatta Presige or ASV Euro spares who both are european car wreckers that usually specialise in BMW's who would most likely have the part you are after. http://www.eurocarparts.com.au/ http://www.parramattaprestige.com.au/ Last edited by Rob32R; 01-18-2013 at 03:32 AM.

01-18-2013, 05:53 AM	#5
Goondaddy Registered User Join Date: Jan 2009 Location: Sydney, Australia Posts: 2,059 My Ride: 2002 325ci View My Garage	Should have posted this last week. Just threw out my old one! Also recommend SWEA. Last edited by Goondaddy; 01-18-2013 at 05:54 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

01-16-2013, 04:52 PM	#2
Pawley Registered User Join Date: Jul 2011 Location: Adelaide Posts: 43 My Ride: 2001 330Ci View My Garage	Hi Sychen, I am in the midst of replacing my OEM pre-facelift front bumper with a M-tech II. The OEM bar has some paint damage (carbon schwartz 303 in colour) and will need to be resprayed, but is otherwise structurally sound. I am in Adelaide, but could arrange freight.