E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. E46 General
    Decided to change out fsr while waiting to see if aux fuse was killing my battery. Upon changing i noticed how the lanch holding it seemed to be stuck. Was a b!tch but tried my hardest not to break it and upon pulling old unit out, immediate realization that this one is shockingly different...
  2. E46 General
    yah i did a refresh cooling system last week this is basically my thoughts and some side notes after the cooling refresh 1 radiator i went with the behr (oem) radiator it will not fit in that easy the first time there will be a 1 / 4 " gap on the screw bolt points (which you will need to...
  3. DIY Guides
    Tools/parts: - Floor jack and one jack stand - Philips screwdriver - Torx 25 bit - 8" extension - 3/8ths ratchet - 8mm socket or 8mm wrench - 9mm socket - 13mm socket - Fan clutch tools - OEM electric fan: 17117561757 - Expanding rivet: 17111712963 (for the expansion tank side to hold fan to...
1-3 of 3 Results
Top