E46Fanatics - View Single Post - HPF E46 turbo Grassroots Support
View Single Post
Old 01-05-2014, 04:43 PM   #124
being3
OEM ///Member
 
being3's Avatar
 
Join Date: Nov 2011
Location: British Columbia, Canada eh
Posts: 1,460
My Ride: Turbo M3 7168 27PSI
HPF E46 turbo Grassroots Support

I'm working on something new with DME for HPF Cars.

I'm working on disabling the error codes in the DME that r specific to HPF AEM V1 Generation 1 & 2 cars. That way we can benefit from:

- Eliminate Dash led and when a real code comes up we can rely on dash led to indicate any other problem.
- allow GT1 / Autologic tools to run test routines without faulting because of error codes
- pass regular visual and scan based safety inspections which most require no engine led to pass (not including emissions test)
- remove all the factory 02 sensors to clean up and simplify the wiring and eliminate potential shorts etc...

I'll also have the dyno mode activated for 8000rpm, sport button recall last memory, shift lights for manual trans, speed limiter set to 200mph, sport button comfort and sport tables revamped for more aggressiveness.

Also able to modify DME for SMG to manual conversions.

I have modified my DME accordingly but need to test it... Cars apart for more mods at present so it will be a little while. I'll post back with results when verified. Pretty sure it's going to be a go

Sent from BimmerApp mobile app
__________________
"Horsepower is how fast you hit the wall. Torque is how far you go through it."

Last edited by being3; 01-05-2014 at 05:14 PM.
being3 is offline   Reply With Quote