| Got a little more done this weekend.
Started by changing the thermostat on the 645 and some lamps.
Then on to the real project
Painted and mounted pressure pipe from the intercooler, then I covered it.
Mounted pwm control from maxxtuning for my two pumps in the catch tank.
Late yesterday 25/8 I started the newly built engine for the first time, unfortunately it sounds like a tractor. There is only a short 90 degree bend as the exhaust system. Everything was fine and the fuel and oil systems worked without problems.
Last edited by 79conman; 08-26-2019 at 02:17 PM.