|09-16-2012, 06:03 PM||#1|
WTB: e46 330ci performance exhaust: Dinan, Eisenmann, Gruppe M
Looking to buy a used but good condition performance exhaust for the e46 330ci. Dinan, Eisenmann, Gruppe M, or similar. No Magnaflow.
|09-17-2012, 01:36 PM||#2|
Past Site Sponsor
Join Date: Sep 2011
Location: La Habra, CA
My Ride: E46
If you can't find anything used, I can certainly help out with something new. We've got lots of good affordable options listed below if you want to check the out:
Limited lifetime warranty
Guaranteed to produce huge HP and TQ gains
Fully polished mandrel bent SS tubing
Increase in fuel mileage
No interior resonance
Incredibly deep rumble
Designed to fit perfectly
All bolt on
Billy Boat E46 Performance Exhaust System 323i/325i/328i/330i
Only 21 pounds (replaces the 30 pound unit from the factory)
Full 304 Stainless Steel construction
Mandrel bent, not pinched, dual 57mm tubing (stock is dual 50mm), allowing for increased air flow yielding positive performance gains.
Mill-finished pipes and muffler, mirror polished dual 3" angle cut, double-walled, staggered tips.
Entire exhaust utilizes TIG welded construction
Deep tone (stock center resonator is retained)
Maintains BMW factory warranty
Rogue Engineering logo tastefully stamped in the body of the muffler
Adjustable mounting positions allow variable positioning with aftermarket bodywork
Can be clamped or welded (because factory exhaust must be cut, professional installation recommended)
Rogue Engineering IKON Exhaust BMW E46 3 Series
If you have any questions, please don't hesitate to PM/Email or call me direct at 714.582.3330 extension 8002, and ask for Jurrian!
|cat back, dinan, exhaust, rasp x, straight pipes|
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|