|06-21-2019, 07:02 PM||#1|
Join Date: Sep 2014
Location: Greater Seattle, WA
My Ride: F22 M235i, F80 M3
M235i : Replacing hub assembly bearing
Man, why does everything always look so easy on paper but so difficult in real life?
The center bolt in the center of the hub is easy to remove following the steps. You need someone to step on the brakes while you use a breaker bar to unscrew it.
But .... but ... but ... the 4 bolts that holds the hub assembly to the drive axle is truly a pain to remove --- the axle is in the way.
TiS instructions are not realistic. I think we need to remove the rest of the suspension pieces to have enough room to work out those damn 4 bolts.
I got one unscrewed but it cannot come out because it's blocked.
Any suggestions and help would be great.
2018 (F80) M3 (Garage Baby) | 6MT | Comp Pkg | Exec Pkg
2015 (F22) M235i xDrive (daily commuter) | 8AT | Prem Pkg | Tech Pkg | HK Snd | Cold Weather Pkg | Driver's Assist Pkg | MPE
2004 (E46) 330i AT (Project car)
2015 335xi AT (Sold) | 2009 335i 6MT (Sold) | 2006 325i my kid's car (Sold & regretted)
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|