|04-03-2017, 02:43 PM||#1|
Join Date: Jan 2017
My Ride: BMW e46 318Ci 2001
Not an engine swap more of a transmission swap
Hi i decided to convert my manual 318Ci from 2001 to an automatic, for the comfort in the hell traffic is becoming, and got all the parts, put the mechanical all almost well, on the wiring harness i just compared what was not present on my car wire wise and extracted them form a sedan wiring harness, now clearly i did something wrong somewhere, gearbox works all steps but i have a issue on the engine side i get the fallowing errors on my DME no matter what i do.
27C3 Failure oil status sensor
2772 Tank-Ventilation valve output stage
279C Output thermostat map cooling
278D Temp, sensor coolant temperature
2783 Hot film air mass meter
non of them was present before the gearbox swap, tried with 3 different DME''s 2002 DSC, my old manual DME ASC, and the DME form the donner car... also ASC as the car is equipped.
did a side by side comparison of the wiring harness for the engine as well in the hope i might find a difference... i dont know what i'm missing...
starting any leads would be grate and appreciated...
Last edited by Spider2077; 04-03-2017 at 02:47 PM.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|