|03-05-2019, 04:44 PM||#1|
Join Date: Mar 2019
M47tud20 swap to m54b30
Hi fellow enthusiasts!
I have been searching on forums for it a long time but have not found any info about this kind kind of swap.
I am going to swap my 2.0d engine for a m54b30 and the one part that I am stuck with is the wiring to the DME.
There is a different kind of connector to the DME on m47 than m54.
I understand that I will need to cut the wires coming from the body to the DME and solder on the connectors for MS43.
As I have a donor car that is running, there should not be a problem with it.
The only issue for me is that I cannot find the pinout for m47 DME.
The DME is this one: 7789327 0281010565
So my fellow enthusiasts, do you maybe have knowledge on where to find the pinout for this DME?
I have checked the Bentley manual, but nothing like that is in there.
I will really appreciate your responses.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|M54B30 with Getrag 250. Will it hold?||mega_stihl||General E46 Forum||14||03-01-2019 01:56 AM|
|Anybody do or consider 2jz swap? 328ci 2000.||E46shmob||E46 Engine Swaps||2||02-18-2019 05:03 PM|
|Wats cheaper? Interior swap? or tranny swap?||iLLeGaLaKKoRD||General E46 Forum||23||04-17-2008 03:57 AM|
|To swap or not to swap||emandizzy||General E46 Forum||8||01-28-2004 11:20 AM|
|Any hard numbers for diff swap results?||Plaz||General E46 Forum||3||01-16-2004 10:48 AM|