E46 Fanatics Forum banner

Siemens MS42 wiki

43K views 75 replies 23 participants last post by  d_cleverzz 
#1 ·
I can proudly say that the first iteration of Siemens MS42 wiki is online :clap:

There are probably glitches and errors currently as i haven´t had time to remove them all, but i´ll work at it in the next week.

http://ms43wiki.com/index.php/MS42

Thanks to ragazm :hi:
 
#10 · (Edited)
This should be pretty easy to do on my own correct? All im looking to do is delete post cat O2s and the SAP. I have JMGarage flasher, Tunerpro, and Galleto.I also have the XDF from the MS42 wiki...

Will I just need TunerPro, the XDF, and the Checksum corrector? By the way I have no idea what a checksum corrector is, this is all VERY new to me.
 
#39 ·
Hello,
My original version of the firmware is 0110025, I write version 01100AD Virgin.

I changed pump parameters:
konf_ssp = 1 (Secondary Air Pump Delete)
epz_inc_rul = 00 (off DTC 96 Auxiliary Air Pump - Function)
epz_inc_slp = 00 (off DCT 35 Aux. Air Injection System Relay)
epz_inc_slv = 00 (off DTC 62 Aux. Air Injection System -Switching Valve)

It displayed me error and a check engine light:
126 activate solenoid valve tank-leck-diagnostic-pump

How to get rid of 126 error?
My car from the original 0110025 firmware doesn't display DTC errors.

I will be very grateful for the solution.
 
#40 ·
Hello,
My original version of the firmware is 0110025, I write version 01100AD Virgin.

I changed pump parameters:
konf_ssp = 1 (Secondary Air Pump Delete)
epz_inc_rul = 00 (off DTC 96 Auxiliary Air Pump - Function)
epz_inc_slp = 00 (off DCT 35 Aux. Air Injection System Relay)
epz_inc_slv = 00 (off DTC 62 Aux. Air Injection System -Switching Valve)

It displayed me error and a check engine light:
126 activate solenoid valve tank-leck-diagnostic-pump

How to get rid of 126 error?
My car from the original 0110025 firmware doesn't display DTC errors.

I will be very grateful for the solution.
0x481A6 epz_inc_ldp
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top