E46 Fanatics Forum banner

E46 manual trans swap problem

909 views 4 replies 2 participants last post by  Tank111202 
#1 ·
Did the manual swap on my 2003 330i. When I release the clutch pedal and the car is in neutral the car dies. Is it because I didn***8217;t flash the dme yet? I know you have to take out $205, but I haven***8217;t done it yet. I have the clutch pedal switches wired to the dme and the ews, but haven***8217;t done the reverse light switch from the trans.
Another problem I***8217;m having is when I depress the clutch pedal and in gear I can***8217;t move the wheels at all. Not sure if the clutch isn***8217;t bled fully yet or what.

Any help is much appreciated.
 
#3 ·
Ok I***8217;ll reflash the dme when I get to my buddy***8217;s house.
I got a brand new clutch kit installed. Maybe the system isn***8217;t bled fully yet. I***8217;ll try more when I get to my car.
Thank you for the help. I***8217;ll update this later if I get it figured out
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top