|10-20-2019, 03:18 PM||#1|
Join Date: Sep 2018
My Ride: E46 320CI, E38 750IA
Transmission: Manual, Automatic
BMW 750IA E38 ADS cable
I've searched for solutions for this as I dont have an serial port on my PC that I'm using for fault codes and all car related things.
I have an INPA (usb) cable that works perfectly for my E46, then I thought I buy an adapter (20pin to 16pin) for my E38 as it is an 1995 it does not have the OBD port inside the car and I needed the round port. I can read some modules like transmission and abs, but not dme's (2 dme) or anything else.
I found a cable on One-Stop-Electronics that is ADS to USB and they claim it works, but I'm not sure since many other say you need a real serial port for the old ADS interface to work.
I don't have an PC old enough to have the serial port, and was wondering if anyone have the cable or have tried it, or if anyone have a solution other than this that may work.
All help is appreciated. Thanks.
|Thread Tools||Search this Thread|
|Display Modes||Rate This Thread|